These products are auxiliary equipment that can help you customize socks better.
Sock Dryer
This dryer uses an automatic control system. Once you set time on the control panel, this dryer would begin to work. The stainless steel tub is simple and smooth so that it won’t scratch socks. The lid can open outwards up to 180 degrees.
This stainless steel machine is polished so that the smooth surface won’t scratch clothes. While it starts working, it is quiet and stable. Besides, this machine is equipped with an automatic timer, a travel switch device and temperature control system.
Senior 1 5 A3 manufacture plastc spraying.color white for computers.
Enclosure the tank material
Senior 1.5 SUS304 stainless steel plate
Box body framework material
5#Angle-8#channel steel
Control drcuit voltage
380V / 50HZ
Delivery time
30 days (imported reducer the goods time need 4 weeks
Safety Instructions
Please read the safety instructions carefully before operation and fully understand The main structure, function and operation method of the machine. If conditions permit,Need to train operators. Please pay attention to our warning signs and improve Safety awareness, avoid accidents, and ensure the personal safety of operators.
Safety Instructions
Open the door, and push the trolley into the steamer quickly, then close the door, Make sure there is no crack between door and steamer, try to adjust 4 door handle make them even .please note, when the steamer is not heated , the door rubber circle could be a little hard .please adjust the 4 door handles again after steamer getting hot This is for preventing too much water leaking
1. temperature control：There are two arrows up and down on the dial, which increase the temperature upwards and decrease the temperature downwards(SET confirm). 2. Time control：”+” plus time, “-” minus time.3. Power：The power indicator light is on and the power is on. 4. Alarm：When the machine reaches the specified time, the machine will sound an alarm. 5. Manual / Auto：Manual/time timing needs to watch the watch by yourself Automatic/when the set time arrives. 6. Water in：Water inlet knob, this knob does not need to be closed after it is turned on. 7. On/off：This button is a switch button, press the switch machine to start work. 8. Electricity/Boiler：This knob is to select point heating or steam heating 9. Heater：Turn on the heating and the machine starts to heat up. 10. Water fan：Turn on the humidity control fan to make the water vapor inside the machine more sufficient and even.
1. The power supply wiring must be sufficient to withstand the maximum rated power. Check whether the voltage provided matches the voltage of the machine, the equipment requirements and meet the voltage shown on the machine name plate. Power supply and wiring can only be done by professional power supply operators. 2. All power supplies should be installed in front of the front fuse or the internal main circuit breaker3. Connect the external power cord to the electrical cabinet through the power cord as required Specify the location and connect to the specified junction box and terminal
Fan: The fan in the baking oven mainly plays a circulatory function, which makes the hot air in the oven flow, so that the temperature at every angle is particularly uniform.
Oven baffle: When the oven is heating up, close the baffle so that heat energy will not be lost, so as to heat up faster and reduce energy loss.
Transmission chain: When the transmission button is turned on, the engine starts to work and drives the drag chain to rotate.
Cotton Sock Dryer
This stainless steel dryer can dry 30 to 50 pairs of socks at once. The operation of this dryer is simple and convenient for users. In turns, productivity is greatly improved.
Senior 1 5 A3 manufacture plastc spraying.color white for computers.
Enclosure the tank material
Senior 1.5 SUS304 stainless steel plate
Box body framework material
5#Angle-8#channel steel
Control drcuit voltage
380V / 50HZ
Delivery time
30 days (imported reducer the goods time need 4 weeks
Steam Machine
This machine is designed for the color retention of cotton socks. The temperature inside can attain 102℃. Socks are recommended to be in the machine for 15 to 20 minutes.
Senior 1 5 A3 manufacture plastc spraying.color white for computers.
Enclosure the tank material
Senior 1.5 SUS304 stainless steel plate
Box body framework material
5#Angle-8#channel steel
Control drcuit voltage
380V / 50HZ
Delivery time
30 days (imported reducer the goods time need 4 weeks
Safety Instructions
Please read the safety instructions carefully before operation and fully understand The main structure, function and operation method of the machine. If conditions permit,Need to train operators. Please pay attention to our warning signs and improve Safety awareness, avoid accidents, and ensure the personal safety of operators.
Safety Instructions
Open the door, and push the trolley into the steamer quickly, then close the door, Make sure there is no crack between door and steamer, try to adjust 4 door handle make them even .please note, when the steamer is not heated , the door rubber circle could be a little hard .please adjust the 4 door handles again after steamer getting hot This is for preventing too much water leaking
1. temperature control：There are two arrows up and down on the dial, which increase the temperature upwards and decrease the temperature downwards(SET confirm). 2. Time control：”+” plus time, “-” minus time.3. Power：The power indicator light is on and the power is on. 4. Alarm：When the machine reaches the specified time, the machine will sound an alarm. 5. Manual / Auto：Manual/time timing needs to watch the watch by yourself Automatic/when the set time arrives. 6. Water in：Water inlet knob, this knob does not need to be closed after it is turned on. 7. On/off：This button is a switch button, press the switch machine to start work. 8. Electricity/Boiler：This knob is to select point heating or steam heating 9. Heater：Turn on the heating and the machine starts to heat up. 10. Water fan：Turn on the humidity control fan to make the water vapor inside the machine more sufficient and even.
1. The power supply wiring must be sufficient to withstand the maximum rated power. Check whether the voltage provided matches the voltage of the machine, the equipment requirements and meet the voltage shown on the machine name plate. Power supply and wiring can only be done by professional power supply operators. 2. All power supplies should be installed in front of the front fuse or the internal main circuit breaker3. Connect the external power cord to the electrical cabinet through the power cord as required Specify the location and connect to the specified junction box and terminal
Electric heating tube: The electric heating tube is a tubular electric heating element, which is composed of metal tube spiral resistance wire and crystalline magnesium oxide powder. Electric heating has excellent overall performance, longer life, and easy maintenance.
Control panel: Use the control panel to set up and manage the device.
Protection System: When there is a problem in the circuit, the overload protection will automatically trip to protect the machine
Request Info
Want to learn more?Submit your request here and we’ll be in touch!
1. The power supply wiring must be sufficient to withstand the maximum rated power. Check
